Pages

Saturday, December 3, 2011

Batman Birthday


This was my favorite party so far and I have a 2 and 4 year old so I've had a few!

I found this cute favor box cake idea here and created my own using the favor box template found here.

I was able to make two 4" boxes from one poster board. The first one was the hardest to figure out but once you have it you can use it to make all the rest by marking all the creases with a pencil so it's much easier to fold. I also used a corner cutter on the corners that needed curves which made that part easier. I also added each child's name in the Batman logo using my Cricut and Make The Cut software.

These cute superhero suckers were included in the favor boxes (template found here). I used leftover poster board scraps, a hole punch for the masks and cape, scrapbook scissors for the bottom of the cape to look more like Batman and a sweet friend to help with the tedious tracing and cutting!


Each child got a Batman cape that I made from some knit polyester found at Hobby Lobby. I cut a cape shape, made points at the bottom and sewed on strips to tie around the neck. This fabric doesn't need to be hemmed and since I was making 12 of these, my main goal was ease of construction! I then used a freezer paper stencil and yellow fabric paint to make the logo cut from my Cricut. 

I must warn you that this fabric is terrible for fabric paint, though; I had to put three coats to make it show up good. I had to let each coat dry in between coats so it took a few days. Also, the freezer paper bubbled a little from being wet each time which made the paint leak in a few spots. I used paper underneath the cape to keep from getting paint on the table and it got stuck on the back side. Use freezer paper instead.  

Nevertheless they turned out fine so I was happy. 


Each kid also got a paper Batman mask cut using this template. It's a really cute idea but it wasn't a very big hit so you may want to skip this part. 

This awesome Bat signal was supposed to take place of a birthday banner but our party was at 3pm so it was too bright to show up on the wall (insert sad face here). I found a tutorial here but I actually didn't need to black anything out like she did because I simply took the reflective piece out and it worked fine. I also used vinyl instead of paper and cut it with my Cricut and Make The Cut software in order to write the personal message. You will have to put the light close to the wall or it will be huge and blurry. We put it up that morning for the birthday boy though and he thought it was awesome! He's used it as a nightlight in his room ever since.

This is the Bat Cave. Coolest part of the party because it took the place of structured activities!

We blacked out all the windows (using cardboard and garbage bags) and hung paper bats and balloons with invisible thread. Each balloon had a Batman Villian taped to it for the kids to shoot at.

This provided hours of entertainment for the kids!

A 12-pack of foam dart launchers cost me $12 on Amazon and each gun came with 2 darts. They shoot SO far AND they're easy enough for little kids!  
 We kept the cake simple and my husband drew a bat with black icing by shining the flashlight on the cake and tracing it!

 I stayed up all hours of the night making this Bat Cave table tent with that same knit polyester used for the capes. This fabric was a horrible choice for this project! DO NOT use a knit fabric for it! I spent too much AND it stretched as I measured and sewed. I chose it so I wouldn't have to hem but it would have been worth the trouble :) I also ran out of fabric so I had to piece the door side together instead of making a slit down the middle like planned. I was going to add a Batman logo to the door but it was 2:30 in the morning so I scrapped the idea. The finished product was pretty bad but it is for a four year old so I'm not too torn up about it. That's what you get for procrastinating!

And the great idea below is courtesy of my artistic husband. My son got some knight dress-up stuff so my husband drew dragons on the balloons left over from the party and they were fighting them with a sword and some nerf guns. He did a great job! Drawing Batman villains on the balloons would have been cooler than taping print-outs onto balloons but also a lot more work for sure. 









Isn't my husband the coolest!? People think I'm creative but I'm not at all... he's the creative/artistic one in the family, I'm just crafty. A load of crafty ;)

Thursday, November 10, 2011

Tuesday, November 8, 2011

Princess Party


Here are a few cute ideas for a princess party using Make The Cut software and a Cricut machine:

I found crown templates online (girl's and boy'sthat I re-sized to be a bit smaller and then merged them into one piece instead of two. I had the kids glue the shapes on the crowns then stapled the band to the back.


The applique on her shirt was also cut using my Cricut but if I did it over I'd just do fabric by hand because I think it dulls the blade.


This picture is hard to see but I found a simple dress image and put each letter on each dress cutting them both (dress and letter) out. The letters that had pieces inside (like R or D) that needed to stay attached were just taped together and it wasn't too noticeable.  

Another hard to see picture has the stars hanging in the windows. They were made from the same posterboard as the crowns. Hang with fishing line or invisible thread and add some pretty lights for a very girly/princess-y look!

Saturday, October 22, 2011

Stuffed Owl

I love this little owl! It's the first stuffed animal I've made and it wasn't hard either. My baby girl loves owls so I searched for a tutorial and found the cutest one at Mile High Mom. I used a pink minky dot fabric on the back for the cuddle-factor, and all the fabric on the front matches the ruffled quilt I'm making her for Christmas (besides the black on the eyes - that's felt). 


I have to mention the tutorial I found and used for closing the seam. It was just what I needed and it worked great! I was amazed. Go to Quilt Taffy to see how to finish off a stuffed animal with an invisible closing seam!


I don't know how I'm going to hold off another week before giving this to my baby. I showed her brother and he said, "Wow! Can I see my stuffed Batman"? Mind you, there is no stuffed Batman but apparently there's gonna have to be now! I will be sharing that tutorial as well as their coordinating twin quilts (since they share a room) in the near future.



Saturday, October 8, 2011

Vinyl Stenciled, Fabric Painted Onesies



I set out to make freezer paper stenciled onsies for a baby shower gift and realized that some of my designs were too intricate for freezer paper (mostly the tires on the jeep). I had some leftover blue vinyl that I wouldn't be using for anything, so I decided to use it along with some transfer paper to apply the stencils to the onsies before painting.


The first batch of stencils were way too big (I guess I forgot how small newborns really are!) so I had to start over and I was already in a time crunch so my sweet husband helped me out by blowdrying them. He tried to be nice and help even more by adding a second coat and ended up getting a blotch on the black guitar onesie. I had to improvise by adding some more blotches all around it using a cut-out of an oval shape. I think it looks cool that way!


 I used my one of my huge vinyl stencils from the first batch to make our son a Superman shirt. After seeing this and helping me with the onesies, my husband decided to use the other huge stencils to make our son a brown jeep shirt with black tires and our daughter a guitar shirt. He was really into it too, he wouldn't even wait for the paint to dry before taking the vinyl off because he was too excited to see the finished product lol!


Because of the cost, I wouldn't recommend regularly using vinyl for this project but if you really want a specific design that's too hard to do with freezer paper, this sure works great! And you don't have to break out the iron :)



Saturday, October 1, 2011

Spooky Blocks



I got a little lazy and didn't bother painting these blocks. I simply mod podged the paper on and used dye on the edges. I really love using my Make The Cut software! So glad I got it before it stopped being compatible with Cricut! 

Have a spooky Halloween!

Thursday, September 29, 2011

Witch's Brooms

I thought these brooms were a cute little Halloween decoration even though they're actually meant to be goodie bags with treats inside. I saw them in a magazine at the dentist and later looked them up online and found them here. I couldn't find a stick laying around outside so I just used wooden dowels instead.

Stay tuned for another spooky Halloween decor idea coming up soon!

Thursday, September 15, 2011

Framed Mirror


I know it's been done a million times before but oh well! I'm proud of my new bathroom mirror and you have to hear about it! Or at least see it anyway. As you can see I also spray painted the light fixture to match the faucet and towel ring. This frame only cost me about 8 bucks. Only problem is that I bought enough to do both my bathrooms and then lost my motivation to do the other one.

Here's the how-to:

1) Measure mirror
2) Buy molding at Home Depot
3) Cut corners with miter box and sand rough edges
4) If you have hooks holding the mirror up, cut out a piece from the molding so it fits over it
5) Paint front and back since the back will show in the mirror
6) Carefully glue to the mirror on the outermost edge (use mirror adhesive)
7) Wood putty corners and paint over them once dry

I did not paint the back at all, did not paint the front until after the molding was up, did not cut out where my metal hooks would be AND I used a crappy glue, therefore had to use multiple shower rods to hold my frame in place until it dried. Moral of the story: Do as I say in my instructions, not as I did :)

Monday, September 5, 2011

Vinyl Bin Labels


I have been meaning to do this project FOR. EV. ER. Seriously over a year now. I guess I just knew it would take some time and effort and I haven't had either one to put into it. Well I finally finished everything else written down on my to-do list and it was the only thing remaining so I just made myself do it. Now I'm off to make a new to-do list!

Monday, June 27, 2011

Spa Rules Sign


Really fun gift for my father-in-law's birthday! I made it with my little 6x12 personal Cricut. I got some blue vinyl and a blank white metal sign from a wholesale company. It was 18x24 so it was a challenge to make my 12" wide sentances fill it up - which is why I added extra vinyl on the sides of the title and bullets to the rules.

Let me know if you have any questions about making it... also, I learned a little tip about getting rid of bubbles in the vinyl. Pop them with a straight pin! So easy.


Sunday, June 19, 2011

Freezer Paper Stencil with Cricut



I don't know why but I've always been too chicken to do the freezer paper stencils... maybe because all the tutorials I found said you had to take an exacto knife to the image and that sounded like way too much work!

Well I went to a craft night with some friends and one of them was doing a shirt for her husband for Father's Day and she was using
this tutorial from I Am Momma, Hear Me Roar. This girl was using the Cricut to cut out her image so I decided this was a way cooler idea than my original one (which was actually cool too - I was going to have my 3 year old son write "Dad" on a shirt and then use a bleach pen to trace over it). I found this website describing how to do this with your cricut.

This project was so fun for my son because after I applied the freezer paper to the shirts with the iron, he could paint on the stencil and essentially be the one to make Dad and Grandpa's shirts. My husband needed a green shirt anyway since he's going to be coaching my son's soccer team and their jerseys are green. I think I may do another one just like it but use heat transfer vinyl instead of fabric paint for a more professional look.




The "Grandpa" one was tricky to design because of the swoosh part... it took forever to design in my Make The Cut software.





Happy Father's Day!



Saturday, May 7, 2011

"MOM" Photo Blocks


How sweet are these photos of me and my mom from way back? I just got a bunch of old photos scanned to a disk at ScanMyPhotos. Normally it's pretty expensive... I'm talking $100 for a thousand photos... but I got a really sweet deal through Groupon - a thousand photos for $29!!!. Love Groupon.

SO I printed these ones on my black and white printer on regular printer paper, mod podged them to some 3.5"x3.5" wood blocks that I painted black, and added the letters cut from paper using my Cricut.

Happy Mother's Day!!



Saturday, April 30, 2011

Jedi Robe


My 3 year old son loves Star Wars (despite the fact that he's never even seen it) so I made him this Jedi Robe using a great tutorial I found online at www.DeGraeve.com.

The tutorial is wonderful but since I was doing it for a child instead of an adult, figuring out the hood and neck was a bit of a challenge. I also could have been much more generous while tracing around and under his arms so keep that in mind if you try it. Good thing he doesn't care about the details :)

I used a twin flat sheet (from his bed, actually) to make this one and one for his baby sister and it was plenty of fabric and the cost for one of those at Walmart is only $4 :D

May the force be with you...